The Sydney water meter installation process is a two-part process that starts with the installation of the water meter itself. This is followed by the installation of a water pressure regulator. The process is straightforward and usually takes about two hours to complete.
Once the water meter is installed, you will need to have your Sydney water pressure regulator installed. This is a simple process that involves attaching the regulator to the incoming water line and then to the water meter. The process is straightforward and usually takes about two hours to complete.
You will need to have your Sydney water pressure regulator installed by a licensed Sydney plumber.
Establishing the Water Meter:
The first step in installing your new water meter is establishing where it needs to be placed within your property with an average water bill in Sydney. You should consult with your local council before setting up your meter as they may have rules regarding the placement of meters within certain areas of your property or even within certain distances from existing meters.
Determining the Reading:
Before you can begin installing your new meter, you will first need to determine how much water you use on average per day by reading your current meter for at least one month. This allows you to calculate whether or not an additional meter is necessary for your home and what size it should be based on its usage patterns. To read your current meter, simply turn off all faucets and appliances that may be running and record what time it is.
Selecting the Installation Location:
The important step in installing your new water meter is choosing a suitable location for it. You should check with your local council before selecting your preferred location as some areas may already be serviced by existing meters. If there are no existing meters then you can choose any area of your property where access is easy and this will ensure that there are no disruptions to other services such as gas or electricity supplies.
Installation of the water pressure regulator:
Installation of the water pressure regulator is a simple process that involves attaching the regulator to the incoming water line and then to the water meter. The process is straightforward and usually takes about two hours to complete.
Conclusion:
The Sydney water meter installation process is a two-part process that starts with the installation of the water meter itself. This is followed by the installation of a water pressure regulator. The process is straightforward and usually takes about two hours to complete.